AT-600Pro

$535.95

Out of stock

Category:

Description

600 Watts SSB & CW Autotuner, 250 Watts on 6M, 4000 Memories.

It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-600Pro with longwires, random wires and antennas fed with ladder line just by adding a balun.

The AT-600Pro features two antenna ports with a front-panel indicator showing which is in use, and separate memory banks for each antenna. Easy to read LED bar-graph meters showing RF power, SWR and tuner status, tactile feedback control buttons and an LED bypass indicator complete the user interface. Any power source from 11 – 16 volts DC can be used; the AT-600Pro draws only 750mA during a tune cycle, much less when not tuning.

Technical Specs:
– 600 Watts SSB and CW, 300W RTTY (250 watts on 6M)
– Easy to read LED bar graph display for RF power, SWR and status
– 4,000 memories for instantaneous band changing
– Two position antenna switch with memories for each position
– Tuning time: 0.5 to 6 seconds full tune, 0.1 second memory tune
– Built in frequency counter for memory operation
– Frequency coverage: 1.8 to 54.0 MHz.
– Tunes 6 to 1000 ohm loads (16 to 150 ohms on 6M)
– For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna
– Includes DC power cable, Icom interface cable and coax jumper.
– Power requirements: 11 to 16 volts DC at 750 mA max during tuning
– Enclosure: 10.5D x 8.5W x 2.5H inches
– Weight: 3 pounds

PRICES SUBJECT TO CHANGE WITHOUT NOTICE